The microSpider Lite is an economical self-contained data logging and telemetry system. It includes all software, hardware, batteries and a built-in mobile phone module. The compact waterproof (IP-68) enclosure makes it suitable for installations in the toughest environments.
microSpider Lite is ideal for simple applications such as metering, tank monitoring and level monitoring.
No software is required on your computer to set up or interrogate a microSpider Lite.
The microSpider Lite can:
- monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
- generate SMS, email and twitter alarms
- record data
- send reports via e-mail, FTP or HTTP
- communicate via internal 3G/4G or LTE Cat M1 modem
- be used in wet environments
- operate for more than 5 years on its replaceable internal battery
- update software automatically in-field from remote servers, or update from connected PC.
The microSpider Lite is ideal for short and long-term monitoring. It can interface with a wide range of sensors and meters. The browser interface makes it easy to set up and test, and there is no need for external power, batteries or solar panels.
The "M" variant features even lower power consumption by utilising the latest LTE Cat M1 communication technology.
microSpider Lite can communicate over private networks as used by large government and commercial entities.
Once installed the microSpider Lite will log data and automatically send reports directly to the end user via e-mail, FTP or HTTP.
No specialised web portals or software subscriptions are required.
User configurable alarms can send SMS, e-mail and twitter alarm messages and automatically initiate sending of data reports.
Note: A LANlink Cable (sold-separately) is required to connect the microSpider Lite to a computer for configuration via the built-in web server.
Economical – low upfront, installation and operational costs
Easy to use – simple familiar web browser interface
Easy to install
Internal batteries - no external batteries, power supplies or solar panels
Integrated mounting – bolt straight to wall
Waterproof enclosure – no need for extra enclosures
Can be managed remotely using SMS commands or FTP server
No special software required
setup and download using browser
reports sent straight to your PC or server
text/csv reports open in Excel
receive reports via email, FTP or HTTP
No licenses, royalties or service agreements
Large internal memory – full local backup of data
Dimensions: (approx) 165(W) x 80(H) x 85 (D) mm
Weight: (approx) 800 g
Enclosure: ABS rated IP - 68 with integrated mounting
Operating temperature: -5 to +50 degrees Celsius
Capacity: approximately 400,000 records
Storage memory: Non-volatile FLASH
Time resolution: 1 second
Download format: CSV file
Integrated long life lithium batteries (up to 10 years battery life depending on application)
Factory backup 12 months parts and labour guarantee
Number of inputs:
- 2 digital
- 2 analog
- 4 system inputs
- SDI-12 / Modbus (with optional Intelligent Interface cable)
- 0 - 12V DC Voltage or voltage-free switch contact
- Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)
Analogue Inputs: Resolution 12 bits
- 4 - 20 mA, common ground
- 0 - 2.4V, common ground
- 0 - 5V, common ground
- 0 - 10V, common ground
Counter / Event Inputs
- Minimum pulse width: 5 ms
- Maximum frequency: 100 Hz
- Range: 0 - 999,999
- System temperature
- Battery voltage
- LAN power voltage
- Internal moisture sensor
Number of outputs 2
- 1 x Open collector for accessory control
- 1 x Low power sensor supply (3.3V or 5V)
Number of alarms: 16
Type: SMS, twitter and/or e-mail transmission
Trigger: User definable input and trigger point
SMS / e-mail / twitter text: 1 per alarm, user definable
Number of phone numbers: 3 per alarm, user definable
Number of e-mail addresses 3 per alarm, user definable
Ethernet 10 base-T, RJ-45 connector on comms cable
Cellular phone module: Built-in 4G/3G or LTE Cat M1
Antenna: internal antenna - standard, external antenna - option
Internet connectivity: 4G, 3G, LAN (with LANlink cable)
Product is available in a variety of configurations to suit your needs, you may specify any of the following:
- Internal or external antenna
- 3G/4G or LTE Cat M1
- Connector or Flying Lead for input
Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 3G/4G modem or local area network.
LANlink Cable (required to connect microSpider2 Environmental to a computer)
microSpider Lite Software V1.86 (Zip)
Manuals / Brochures
microSpider Lite Quick Start Guide
microSpider2 XML Device Profile (Zip file)